MPEG LA 8CH User Manual Page 31

  • Download
  • Add to my manuals
  • Print
  • Page
    / 73
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 30
ADVANCED MENU
~27~
Note: The PPPOE function needs to have one “username” and one “password” subscribed from one ISP
supplier, and a “DDNS account” to correspond the dynamic IP address to a specific “Hostname”.
For detailed PPPOE settings, please refer to “Network” at page 44. For detailed DDNS settings,
please refer to “DDNS” at page 45.
DHCP
1) NETWORK TYPE
Select the network type as DHCP.
2) DNS (PRIMARY DNS / SECONDARY DNS)
Key in the IP address of the domain name server obtained from your ISP (Internet Service Provider).
3) PORT
The valid number ranges from 1 to 9999. The default value is 80. Typically, the TCP port used by HTTP is 80.
However in some cases, it is better to change this port number for added flexibility or security.
See the example below:
DHCP
NETWORK TYPE DHCP
IP 000 . 000 . 000 . 000
GATEWAY 000 . 000 . 000 . 000
NETMASK 000 . 000 . 000 . 000
PRIMARY DNS 168 . 095 . 001 . 001
SECONDARY DNS 139 . 175 . 055 . 244
PORT 0080
PLEASE CONSULT YOUR INSTALLER FOR ADVANCE SETTINGS
uv SELECT s BACK t NEXT ENTER
Note: This DHCP function needs to be supported by a router or a cable modem network with DHCP
services, and a “DDNS account” to correspond the dynamic IP address to a specific “Hostname”,
for this function to work properly.
For detailed DHCP settings, please refer to “Network” at page 44. For detailed DDNS settings,
please refer to “DDNS” at page 45.
7.1.5 Display
In this menu list, you can set up the settings of display.
Move the cursor to “DISPLAY”, and press (enter) button to enter the submenu. You will see the following screen:
DISPLAY
DE-INTERLACE ON
QUAD DWELL DURATION (SEC) 03
FULL SCREEN DWELL DURATION (SEC) 03
PLEASE CONSULT YOUR INSTALLER FOR ADVANCE SETTINGS
uv SELECT s BACK t NEXT ENTER
The submenu items are described below:
1) DE-INTERLACE
Select to enable or disable the de-interlace function (ON / OFF).
Note: If you set the recording image size as “FRAME, please TURN ON de-interlace function.
If you set the recording image size as “CIF”, please TURN OFF the de-interlace function.
Page view 30
1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 72 73

Comments to this Manuals

No comments