MPEG LA 8CH User Manual download pdf (Page 15)

CONNECTION AND SETUP

2.4 DVR Power On

This device should be operated only with the type of power source indicated on the

manufacturer’s label. Connect the indicated AC power cord to the power adapter, and

plug into an electrical outlet. Then, move the power switch to “” to power on the DVR.

Note: Before the DVR is powered on, make sure the cameras are connected and

power-supplied for the detection of the camera video system to be correct,

and check the monitor (either LCD or CRT monitor) is connected to the DVR

before the DVR is powered on for correct video output detection.

Note: To ensure that your DVR works constantly and properly, it's recommended

to use an UPS, Uninterruptible Power Supply (Optional), for continuously

operation.

2.5 Date and Time Setting

Before operating your DVR, please set the date and time on your DVR FIRST.

Note: Please DO NOT change the date or time of your DVR after the recording

function is activated. Otherwise, the recorded data will be disordered and

you will not be able to find the recorded file to backup by time search. If

users change the date or time accidentally when the recording function is

activated, it’s recommended to clear all HDD data, and start recording

again.

Note: For the first time to use the DVR, please power it on for at least 48 hours

continuously after the date & time is set correctly. It helps to prevent DVR

time from resetting after the disconnecting of DVR power. If the DVR time

resets after the disconnecting of DVR power, for example, caused by a

power outage, the battery might run out and please replace the battery as

described in “APPENDIX 5 DVR BATTERY REPLACEMENT” at page 71.

Right-click to enter the DVR password with the password keypad. The default

administrator password is 0000. The status will be changed from (key lock) to

(administrator). Then, right-click to show the main menu, and select “QUICK START” 

“TIME SETUP” to set the date & time.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 87 88

No comments

MPEG LA 8CH User Manual Page 15